Cat Caterpillar Skid Steer Loader 236B 246B 252B 262B Service Repair Manual
Loaded with illustrations, instructions, photos, and diagrams, complete to service and repair your vehicle. Read and print pages directly from the CD, or copy the entire manual to your hard drive.
1120 Pages
ENGINE:
236B HEN00001-06749
246B PAT00001-UP
252B SCP00001-04599
262B PDT00001-UP
3044C Engines
C3.4 Engines
MANUAL COVERS:
Disassembly and Assembly (236B, 246B, 246C, 252B, 256C, 262B, 262C, 262C2 and 272C Skid Steer Loaders Engine Supplement):
- Alternator – Remove and Install
- Air Cleaner – Remove and Install
- Battery and Battery Cable – Separate and Connect
- Cab – Tilt
- Electric Starting Motor – Remove and Install
- Engine – Install
- Engine – Remove
- Engine Enclosure – Remove and Install
- Fuel Priming Pump and Primary Filter (Water Separator) – Remove and Install
- Gear Motor (Fan) – Install
- Gear Motor (Fan) – Remove
- Muffler – Remove and Install
- Pump Mounting – Remove and Install
- Radiator and Hydraulic Oil Cooler – Install
- Radiator and Hydraulic Oil Cooler – Remove
- System Pressure – Release
- Water Pump – Remove and Install
- Water Temperature Regulator – Remove and Install
Schematic (216B2, 226B2, 232B2, 236B2 , 242B2, and 252B2 Skid Steer Loader 247B2 and 257B2 Multi-Terrain Loader Electrical System):
- Electrical System
- Wiring Diagrams
- Schematic
- Component Locations
- Cab and attachments
Specifications (236B2 and 252B2 Skid Steer Loaders Machine Systems):
- Axle
- Control Manifold (Quick Coupler)
- Control Manifold and Solenoid (Parking Brake and 2-Speed)
- Control Valve (Work Tool)
- Coupler Cylinder
- Engine Enclosure
- Gas Spring Group (Cab)
- Gear Motor (Fan)
- Gear Pump
- Hydraulic Oil Filter
- Hydraulic Tank
- Lift Arm Cylinder and Mounting
- Lift Cylinder
- Machine Frame and Mounting
- Motor Mounting (Hydrostatic)
- Pilot Operated Hydraulic Control
- Pilot Operated Hydraulic Control – Hydrostatic
- Piston Motor
- Piston Pump
- Pump Mounting (Hydrostatic)
- Quick Coupler
- Radiator and Hydraulic Oil Cooler
- Return Manifold
- ROPS Mounting
- Tandem Drive
- Tilt Cylinder
- Tire and Rim
Systems Operation (236B2 and 252B2 Skid Steer Loaders Machine Systems):
- Control Manifold and Solenoid (Work Tool Positioner)
- Control Valve (Work Tool)
- General Information
- Governor Control
- Hydrostatic System
- Pilot Hydraulic System
- Pilot Valve (Joystick)
- Piston Motor (Hydrostatic)
- Piston Pump (Hydrostatic)
- Tandem Drive and Axle
- Work Tool Hydraulic System
Testing and Adjusting (236B2 and 252B2 Skid Steer Loaders Hydraulic System):
- Accumulator (Pilot) – Test and Charge
- Hydraulic Oil Contamination – Test
- Hydraulic System Troubleshooting
- Hydrostatic System – Flush and Fill
- Hydrostatic System – Test and Adjust
- Hydrostatic System Troubleshooting
- Line Relief Valve – Test and Adjust
- Machine Preparation
- Main Relief Valve – Test and Adjust
- Operational Checks
- Pilot System Pressure – Test
- Pump Flow – Test
- System Pressure – Release
- Visual Inspection
- Worksheets – Troubleshoot
Disassembly and Assembly (236B, 246B, 252B and 262B Skid Steer Loaders Engine Supplement):
- Air Cleaner – Remove and Install
- Alternator – Remove and Install
- Battery and Battery Cable – Separate and Connect
- Cab – Tilt
- Electric Starting Motor – Remove and Install
- Engine – Install
- Engine – Remove
- Engine Enclosure – Remove and Install
- Fuel Priming Pump and Primary Filter (Water Separator) – Remove and Install
- Gear Motor (Fan) – Install
- Gear Motor (Fan) – Remove
- Hydraulic System Pressure – Release
- Muffler – Remove and Install
- Pump Mounting – Remove and Install
- Radiator and Hydraulic Oil Cooler – Install
- Radiator and Hydraulic Oil Cooler – Remove
- Water Pump – Remove and Install
- Water Temperature Regulator – Remove and Install
Disassembly and Assembly (236B, 236B2, 246B, 252B, 252B2 and 262B Skid Steer Loaders Power Train):
- Axle – Assemble
- Axle – Disassemble
- Axle – Install
- Axle – Remove
- Chain (Drive) – Install
- Chain (Drive) – Remove
- Chain (Drive) Tension – Adjust
- Piston Motor (Hydrostatic) – Assemble
- Piston Motor (Hydrostatic) – Disassemble
- Piston Motor (Hydrostatic) – Install
- Piston Motor (Hydrostatic) – Remove
- Piston Pump (Hydrostatic) – Install
- Piston Pump (Hydrostatic) – Remove
- Tire and Rim – Remove and Install
Specifications (236B, 246B, 252B and 262B Skid Steer Loaders Machine Systems):
- Axle
- Control Manifold (Quick Coupler)
- Control Manifold and Solenoid (Parking Brake and 2-Speed)
- Control Valve (Work Tool)
- Coupler Cylinder
- Engine Enclosure
- Gas Spring Group (Cab)
- Gear Motor (Fan)
- Gear Pump
- Hydraulic Oil Filter
- Hydraulic Tank
- Lift Arm Cylinder and Mounting
- Lift Cylinder
- Machine Frame and Mounting
- Motor Mounting (Hydrostatic)
- Pilot Operated Hydraulic Control
- Pilot Operated Hydraulic Control – Hydrostatic
- Piston Motor
- Piston Pump
- Pump Mounting (Hydrostatic)
- Quick Coupler
- Radiator and Hydraulic Oil Cooler
- Radiator and Hydraulic Oil Cooler (Fan)
- Return Manifold
- ROPS Mounting
- Tandem Drive
- Tilt Cylinder
- Tire and Rim
Systems Operation (236B, 246B, 252B and 262B Skid Steer Loaders Hydraulic System):
- Control Manifold and Solenoid (Work Tool Positioner)
- Control Valve (Work Tool)
- General Information
- Governor Control
- Hydrostatic System
- Pilot Hydraulic System
- Piston Motor (Hydrostatic)
- Piston Pump (Hydrostatic)
- Tandem Drive and Axle
- Work Tool Hydraulic System
Testing and Adjusting (236B, 246B, 252B and 262B Skid Steer Loaders Hydraulic System):
- Accumulator (Pilot) – Test and Charge
- Hydraulic Oil Contamination – Test
- Hydraulic System Troubleshooting
- Hydrostatic System – Flush and Fill
- Hydrostatic System – Test and Adjust
- Hydrostatic System Troubleshooting
- Line Relief Valve – Test and Adjust
- Machine Preparation
- Main Relief Valve – Test and Adjust
- Operational Checks
- Pilot System Pressure – Test
- Pump Flow – Test
- System Pressure – Release
- Visual Inspection
- Worksheets – Troubleshoot
Disassembly and Assembly (236B, 236B2, 246B, 252B, 252B2 and 262B Skid Steer Loaders Machine Systems):
- Accumulator – Remove and Install
- Cab – Install
- Cab – Remove
- Cab – Tilt
- Control Valve (Work Tool) – Assemble
- Control Valve (Work Tool) – Disassemble
- Control Valve (Work Tool) – Install
- Control Valve (Work Tool) – Remove
- Disconnecting Snap To Connect Fittings
- Diverter Valve – Install
- Diverter Valve – Remove
- Gas Spring – Remove and Install
- Gear Pump – Assemble
- Gear Pump – Disassemble
- Gear Pump – Install
- Gear Pump – Remove
- Hydraulic System Pressure – Release
- Hydraulic Tank – Install
- Hydraulic Tank – Remove
- Lift Arms – Install – Extended Reach Machines
- Lift Arms – Install – Radial Arc Machines
- Lift Arms – Remove – Extended Reach Machines
- Lift Arms – Remove – Radial Arc Machines
- Lift Cylinder – Install – Extended Reach Machines
- Lift Cylinder – Install – Radial Arc Machines
- Lift Cylinder – Remove – Extended Reach Machines
- Lift Cylinder – Remove – Radial Arc Machines
- Pilot Operated Hydraulic Control – Assemble
- Pilot Operated Hydraulic Control – Disassemble
- Pilot Operated Hydraulic Control – Install
- Pilot Operated Hydraulic Control – Remove
- Seat – Remove and Install
- Tilt Cylinder – Install
- Tilt Cylinder – Remove
Schematic (216B, 216B2, 226B, 226B2, 232B, 232B2, 236B, 236B2, 242B, 242B2, 246B, 252B, 252B2, and 262B Skid Steer Loader Hydraulic System)
Schematic (Skid Steer Loaders 216B, 216B2, 226B, 226B2, 232B, 232B2, 236B, 236B2, 242B, 242B2, 246B, 248B, 252B, 252B2, 262B, 268B and Multi Terrain Loaders 247B, 247B2, 257B, 257B2, 267B, 277B, 287B Electrical System)
This manual is the same as the manual used by workshops. Service Manual contains detailed instructions and step by step diagrams for all workshop procedures.
Language: English
Format: PDF – Indexed and Searchable
COMPATIBLE WITH ALL WINDOWS & MAC COMPUTERS
(WINDOWS 10, WINDOWS 8, WINDOWS 7, VISTA 32 and 64, XP, ME, 98, NT, 2000 ETC.)
Windows/Mac/Tablet/Phone Friendly
